Zte Altair 2 - Tip Calculator; Stopwatch; World Time; Conversion

37TOOLS
4. Select Stop to stop the timing and view the total duration of time.
5. If desired, select Continue to resume timing from the point at which the
timer was stopped.
6. Select Reset to reset the stopwatch.
World time
With this feature, you can check the current local time and date for major
cities around the world.
1. From the home screen, go to the Main menu > Tools > World Time.
2. Press left or right on the Up/Down/Left/Right key to select a city.
3. Press the Center select key to search for a city by name.
4. Press the Left select key to access the Options screen for this feature. You
can save the selected city time as the local time for your phone, and you
can also set Daylight Savings Time preferences.
Conversion
This feature allows you to convert between different units of measurement.
From the home screen, go to the Main menu > Tools > Conversion. Select
Type eld to select the type of conversion to perform (Currency, Area, Length,
Mass, Volume, or Temperature).
Currency conversions
1. Enter an exchange rate in the Rates eld.
2. Use the Up/Down/Left/Right key to highlight the Home or Foreign eld,
and enter an amount depending on which conversion you need.
36 TOOLS
Tips:
• Press the Right select key for Clear to clear digits and results.
• Enter # to toggle the number between positive and negative.
• Enter * to enter a decimal point.
Tip calculator
The Tip Calculator will automatically calculate the tip at a restaurant, and it
can also divide the bill according to the number of people in the party.
1. From the home screen, go to the Main menu > Tools > Tip Calculator.
2. Enter the dollar amount by using the Number keys.
3. Press right on the Up/Down/Left/Right key and enter the cent amount.
4. Enter the tip percentage you would like to leave.
5. If the cost will be shared by more than one person, enter the number of the
people in the Split eld.
6. At bottom of the screen, the amount you need to pay will be displayed.
Stopwatch
The Stopwatch can measure time increments. It can also record lap
measurements.
1. From the home screen, go to the Main menu > Tools > Stop Watch.
2. Select Start to start timing.
3. If desired, select Lap during the timing operation to capture a lap time
while the timer continues to run.