Zte Grand X - Managing Notifications

50 CONNECTING TO THE INTERNET
51CONNECTING TO THE INTERNET
Checking the Wi-Fi network status
You can check the Wi-Fi network by looking at the icon in the status bar.
Or tap the access point that the phone is currently connected to in the Wi-Fi
screen. You can then check the network status from the pop-up window.
Connecting to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone
to the access points which supply WPS.
You can use one of the following methods to connect your phone to a wireless
network using WPS.
Method one: WPS button (Recommended)
1. From the home screen, tap > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap .
4. Press the WPS button on the wireless router and the access point will
recognize your phone and add it to the network.
Method two: PIN number
1. From the home screen, tap > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Tap the > WPS PIN Entry.
4. The WPS PIN number displays on the screen. Enter the PIN number into the
access point’s setup page.
After entering the PIN number, your phone automatically nds the access
point and congures the connection.
Note: For detailed information about the WPS feature of access point, please
refer to its documentation.
Connecting to a Wi-Fi network
1. From the home screen, tap > System settings > Wi-Fi. The Wi-Fi access
points, or “hotspots,” that your phone has detected are displayed with their
names and security settings.
2. Tap an access point to connect to it. If security features are implemented,
you’ll need to enter a password.
Note: Your phone automatically connects to previously used Wi-Fi networks
when they are in range.
Tip: To connect to a Wi-Fi router that supports WPS, tap on the phone’s Wi-Fi
menu and press the WPS button on your router.
Adding a Wi-Fi network
You can add a Wi-Fi network if the network does not broadcast its name
(SSID), or to add a Wi-Fi network when you are out of range.
To connect to a secured network, you rst need to get the security details from
the network’s administrator.
1. From the home screen, tap > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap .
4. Enter the network SSID (name). If necessary, enter security or other network
conguration details.
5. Tap Save.