6 CONTENTS
7GETTING STARTED
Getting started
Phone setup
Installing the micro-SIM card and battery
Power off your phone before installing or replacing
the battery or micro-SIM card.
1. Remove the back cover.
2. Insert the micro-SIM card into the card slot with
the cut corner oriented as shown.
Important: Your phone only supports micro-SIM
card. To avoid damage to the phone, do not use
other kinds of SIM cards or a non-standard micro-
SIM card cut from a SIM card. You can get the
standard micro-SIM card from your service provider.
3. Carefully insert the battery with the contacts
located against the metal springs. Push
down on the battery until it is fully seated.
4. Replace the back cover.
System ......................................................91
Upgrading the phone software ....................................93
Troubleshooting ................................................. 94
For your safety ..................................................97
General safety ................................................97
FCC regulations ...............................................98
RF exposure information (SAR) ...................................99
Hearing Aid Compatibility (HAC) ................................100
CTIA .......................................................102
Distraction .................................................. 103
Product handling .............................................103
Electrical safety ..............................................107
Interference .................................................107
Explosive environments ........................................ 109
Specications .................................................111
Warranty ...................................................... 111
Limited warranty .............................................112
How to get warranty service ....................................113
Other warranty programs ......................................113
Notes .........................................................114