13
Follow these Steps
1. Ensure the Wi-Fi enabled device you wish to
connect to yourJetpack has Wi-Fi turned on,
then use the Wi-Fi application toestablish a
connection to your Jetpack.
2. Look for the network (SSID) named “Verizon-
890L”. There are XXXX digits unique to your
device following the network (SSID) name
displayed.
3. Click Connect and enter the default password
printed on the back of your Jetpack .
NOTE: Your password will also be displayed on the
Jetpack screen each time the Jetpack is powered
on.
Accessing the Internet
After successfully establishing the connection
between your Jetpack and computer, you can
access the Internet in the Auto Connect, Manual
Connect mode. The default mode is Auto Connect.
To Next Page
Loading...
Need help?
General
