14
Advanced Configuration
1. Make sure your computer is connected to the
Jetpack .
2. Launch the internet browser and enter
http://192.168.1.1 or http://vz.hotspot in
the address bar.
NOTE: It is recommended that you use IE (7.0 or
later), Firefox (3.0 or later), Opera (10.0 or later),
Safari (4.0 or later) or Chrome (5.0 or later).
3. The login page appears as follows:
Input the case-sensitive default password printed
on the back of your Jetpack, and then click Login
to access the Web User Interface.
NOTE: Do not put anything on the top of your
Jetpack. Do not lay devices to overlap each other
when using.The Jetpack takes 1~2 minutes to
initialize, and attach to the network.
To Next Page
Loading...
Need help?
General
