Zte MC7010CA - LED Behavior; LED Indicator Notes

20
LED Behavior
When setting up the MC7010CA, the LED will have the following behavior.
NOTES:
• To avoid light pollution and save energy, indicators will be turned off after the device operates
normally for about 15 minutes. If indicators need to be solid on, you can change it‘s settings on
the MC7010CA configuration page.
• When a problem occurs, indicators will be automatically lighted up again to help you check the
device status. After the problem is resolved, indicators will be turned off immediately.
Indicator
Status
Description
POWER
On
Power is on and external power supply is working
normally.
Off
Power is off.
NETWORK
Red blinking
The device is in error status:
• The device isnot registered to the mobile network.
• There is no nano-SIM card inserted.
• There is no network service available.
Green on
The device isregistered or connected to the 5G
networkand data is being transferred.
Green blinking
The device isconnected or connected to the 3G/4G
LTE network and data is being transferred.
LAN
Green on
The LAN port is connected.
Green blinking
Data is being transferred.
Off
The LAN port is not connected.
SIGNAL
(Three
lights)
On
Three lights show the signal strength. More lightson
means better signals.
Off
There is no signal or no nano-SIM card is inserted.