Zte MC888 Manual

3
y
Network cable(RJ45):
Connect with the computer via LAN ports and then access the
Internet.
5. Change Your Device Settings
You can change the device settings by logging in to the 5G CPE management web page.
1. View the label on your device to get the default
Device Manager Website IP address
and
Password
.
2. Launch the Internet browser and enter the
Device Manager Website IP address
in the
address bar.
3. Input the password and then click
Login
.
4. After the 5G CPE management web page is opened, you can change the Wi-Fi SSID,
password or other settings.

Zte MC888 Specifications

General

Category	Network Router
Type	5G CPE
5G NR Sub 6Ghz	Yes
5G NR mmWave	No
4G LTE	Yes
Wi-Fi Standard	Wi-Fi 6
Wi-Fi Bands	2.4 GHz & 5 GHz
Battery	No
SIM Slot	Nano-SIM
Ethernet Ports	1 x WAN/LAN Gigabit Ethernet