4
Dual-network Modes
Your device supports the dual-network modes (Automatic Mode and Hybrid Mode). You can use
the nano-SIM card and broadband service network port (WAN) to access the Internet.
1. Insert the nano-SIM card and connect the broadband service network port to the LAN port1.
2. Log in to the 5G CPE management web page.
3. Change operation mode to
Automatic
or
Hybrid Mode.
The device will be restarted
automatically.
Automatic:
The wired network is used as the default network. If the wired network is
disconnected, you can use the nano-SIM card to access the Internet.
Hybrid Mode:
You can use two types of networks to access the Internet at the same time
to increase the network speed. If one is disconnected, the other still works properly.
NOTE:
Please disconnect from the Internet rst and then you can change mode.
4. Set the wired network parameters given by your service provider.
5. Use your clients to access the Internet.
Cable Broadband Mode
Your device supports the cable broadband mode and you can use this service from your service
provider to access the Internet.
1. Connect either of the two LAN ports and the broadband service network port with a network
cable.
2. Log in to the 5G CPE management web page.
3. Change operation mode to
Cable Broadband Mode.
NOTE:
Please disconnect from the Internet rst and then you can change mode.
To Next Page
Loading...
Need help?
General
