Zte MF283U - Configuring Your PC

4
Indicator State Description
3G/4G
Red
The device is turned on but not
registered to the mobile network.
Blue blinking
The device is connected to the LTE
network and data is being transferred.
Blue solid
The device is registered to the LTE
network.
Green blinking
The device is connected to the 2G/3G
network and data is being transferred.
Green solid
The device is registered to the 2G/3G
network.
NOTE:
The phone function needs the network support.
Configuring Your PC
The following procedure describes how to configure the Internet Protocol in Windows for your
Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
NOTE:
If you use a network cable to connect your PC to your device, you need to right-click Local Area
Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address
automatically, and click OK.