Zte MF29A - Operation Mode; Configure the WAN Connection

14
NOTE:
If you select the Bridge mode, you need to connect your clients to the LAN ports via
Ethernet cable, and use normal methods to surf directly on your clients. If you want
to use other operation mode after Bridge, you need to restore your device.
3. Congure the WAN Connection. (Optional)
NOTE: This step is used for Cable Broadband mode and 3G/4G Gateway mode.
• For Cable Broadband
u
Please select PPPoE, and input the User Name and Password.
NOTE: Your service provider gives you the User Name and Password.