Zte MF29A - Page 28

28
• Fragment Threshold: This value should remain at its default value of 2346. If
you experience a high packet error rate, you may slightly increase your frag-
ment threshold. Setting the fragment threshold too low may result in poor per-
formance.
• RTS Threshold: Request To Send (RTS) threshold should be remained as the
value of 2347. If you encounter inconsistent data ow, only minor modications
are recommended.
• TX Power: Transmit power should be remained as the value of 100.
• Short Preamble: The length of CRC block in the frames during the wireless
communication.
• Shot Slot: To indicate that 802.11g is using a shot time slot because there is
no legacy station(802.11b) present.
• Tx Burst: Tx burst allows router to deliver better throughput in the same period
and environment in order to increase speed.
• Pkt_Aggregate: Increase efciency by aggregating multiple application pack-
ets data into a single transmission frame. In this way, 802.11n networks can
send multiple data packets with the xed overhead cost in just a single frame.
Country Code: Select the region you live.
The Wi-Fi multimedia parameters are shown below:
• WMM Capable: When multimedia contents are transferred over wireless net-
work, this function enhances data transfer performance.
• APSD Capable: Automatic Power Save Delivery (APSD),enable or disable
data ow using APSD during transmitting for power saving.
Click Apply to conrm your conguration.