Zte MF612 - Power Switch; Interface and Installation; Interface Description

11
LED Indicators
Indicator
State
Description
1. PWR
ON
External power supply works
normally.
OFF
External power supply is
disconnected or power off.
2. Wi-Fi
ON
Wi-Fi works normally.
Blinking
Data transmission.
OFF
Wi-Fi works abnormally, or is
disconnected.
3. PPP
ON
Internet connected.
Blinking
The router attempts to connect
Internet.
OFF
Internet disconnected and not
attempt to connect.
4. RSSI
ON
RF signal is normal. Different
color indicates different
network.
Red: GSM/GPRS/EDGE.
Green: HSDPA/HSUPA/UMTS.
Blinking
RF signal is poor.
OFF
RF signal is not available.
Note: The indicators (including PPP and RSSI) are all blinking in green
when:
 The USIM card has not been installed.
 The PIN code or PUK code is required.
 The router cannot work normally.