IP Address: IP address for LAN interface.
Subnet Mask: Subnet mask for the IP address.
MAC Address: MAC address for the LAN interface.
DHCP Type: Define the DHCP type. By default, router is set as
DHCP server.
DHCP Start IP: Allocate start IP address for IP pool.
DHCP End IP: Allocate end IP address for IP pool. The DHCP
End IP address should be larger than the DHCP Start IP address.
DHCP Lease Time: Define how long the leased IP address will be
expired, and will relocate new IP address.
UPNP: Enable Universal Plug and Play(UPNP) or not.
Click Apply to confirm your configuration.
2. DHCP Clients
Select Router→DHCP Clients, the DHCP clients parameters are
shown in the following figure:
To Next Page
Loading...
