What to do if the client connected to Zte MF63 cannot access the internet?
If your client, connected to the Zte Wireless Router, can't access the Internet, ensure your SIM card is active. Also, try changing your location to improve the signal. Verify your WAN connection mode settings and confirm your APN settings with your service provider.
Why can't my device connected to the Zte Wireless Router access the internet?
If a client connected to the device cannot access the Internet, ensure your SIM card is active. Also, try changing your location to find a spot with a better signal. Check the WAN Connection mode setting. If problems persist, contact your service provider to confirm your APN settings.
How to find the password for my Zte MF63 Wireless Router?
For the Wi-Fi connection password, check the label on the device. Alternatively, press the WPS button twice to display the SSID and Wi-Fi password on the screen. The default password for the webGUI configuration page is 'smartbro'. If you've changed the password and forgotten it, restore the device to its factory default settings.
Why can't I establish a Wi-Fi connection between my device and client using Zte Wireless Router?
If you can't establish a Wi-Fi connection between your device and client on your Zte Wireless Router, first ensure the Wi-Fi function is enabled by pressing the WPS button. Refresh the network list and select the correct SSID. Check the IP address settings to ensure your client obtains an IP address automatically in the Internet protocol (TCP/IP) properties. Finally, verify that you are typing the correct network key (Wi-Fi password).
How to find the password for Zte MF63?
To find the Wi-Fi connection password for your Zte Wireless Router, check the label on the device. Alternatively, press the WPS button twice to display the SSID and Wi-Fi password on the screen. The default password for the webGUI configuration page is 'admin'. If you've changed the password and forgotten it, you'll need to restore the device to its factory default settings.
How to fix the Wi-Fi connection issues between my device and Zte MF63 client?
To establish a Wi-Fi connection, refresh the network list and select the correct SSID. Also, ensure your client obtains an IP address automatically in the Internet protocol (TCP/IP) properties. Finally, verify that you're typing the correct network key (Wi-Fi password) when connecting to the device.
What to do if I can't visit the webGUI configuration page of my Zte MF63?
If you cannot access the webGUI configuration page, ensure you're entering the correct address, which is http://192.168.0.1 or http://ufi.home by default. Also, use only one network adapter in your PC and ensure you are not using any proxy server.
What to do if Zte Wireless Router overheats and shuts down?
If your Zte Wireless Router overheats and shuts down, cool it in a well-ventilated place before turning it on again for normal use. This is likely due to prolonged use in a confined space, causing excessive heat and a rise in ambient temperature.
Why should I avoid touching the inner antenna area of my Zte MF63?
Avoid touching the inner antenna area of your Zte Wireless Router unnecessarily, as it can negatively affect your device’s performance.
What to do if I cannot establish a USB connection between my device and PC using Zte Wireless Router?
If you can't establish a USB connection between your device and PC with your Zte Wireless Router, you may need to install the software by running the installation program located in My Computer > ZTEMODEM. If the device driver is abnormal, reinstall the software after uninstalling it first.
General| Wi-Fi Standard | 802.11b/g/n |
|---|---|
| Frequency Bands | 2.4 GHz |
| Maximum Wireless Speed | 150 Mbps |
| Max Download Speed | 21.6 Mbps |
| Max Upload Speed | 5.76 Mbps |
| SIM Card Slot | Yes |
| Security | WEP, WPA, WPA2 |
| Battery | Yes |
| Operating Time | Up to 4 hours |
| Standby Time | Up to 100 hours |
| Model | MF63 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
To Next Page
