4
5. External antenna connector — plugs in antenna if necessary.
6. USB folding hinge — folds the USB Connector into your MF861, and allows
the USB Connector to be extended and plugged into your computer.
7. (U)SIM card slot — insert the 4G LTE SIM card into the spring-loaded SIM
card slot.
Status LED Indicator
The LED indicates the device’s connection status:
Device is ready & cell connection is registered
Device is powering up, Searching for network to start
No cell service due to the coverage
FOTA upgrading or new SMS received
Failure state (No SIM, locked SIM, SIM error, PUK
error)
Connecting the MF861 to Your PC
1. Use your thumb to gently flip open the USB connector on your USB modem.
NOTE:
Be sure to avoid over-extending the USB connector past its resistance point.
To Next Page
Loading...
Need help?
General
