8
Configure Data Network Options
You can set network mode, and choose whether to allow the MF861 to be used
when roaming internationally, from the AT&T USB Modem configuration page.
1. Launch the Internet browser and enter http://192.168.1.1 or
http://attusbmodem/ in the address bar.
2. Select Home on the navigation menu on the left side.
3. Choose the appropriate option:
• To enable / disable mobile data, click On or Off next to Standard Data in Data
Connection section, and click Apply.
• To enable / disable international roaming, click On or Off next to International
Data in Data Connection section, and click Apply.
• To set network mode, click drop-down box beside Network mode and select
your prefer network mode, and then click Apply.