26 Confidential and Proprietary Information of ZTE CORPORATION
device broadcasts the SSID, and other devices can search and connect to it. When you select Disable,
other devices can not search out the SSID. If you want someone to connect, you need to tell them the
SSID, and let them setup manually.
• AP Isolation: When Enabled is selected, each of your wireless clients will not be able to communicate
with each other.
• Country Code: Choose the right country code.
Limited by local law regulations, version for North America does not have region selection option.
• Frequency (Channel): Choose the appropriate channel to optimize the performance of your wireless
network.
• Max Station Number: Choose the maximum number of the stations which connect the AP
simultaneously.
Click Apply to confirm your configuration.
Security
Select Settings > Wi-Fi Settings > Security, the Security parameters are shown in the following figure:
• Security Mode: Select the security method and then configure the required parameters.
none: Open-system authentication accepts any client attempting to connect the device without
verifying its identity.
Security mode-WEP
To Next Page
Loading...
