Zte MF91 - Getting Started

Confidential and Proprietary Information of ZTE CORPORATION 5
1.Getting Started
ZTE MF91 is a 4G mobile hotspot device, working in GSM/GPRS/EDGE/WCDMA/HSPA/HSPA+ /LTE
network. The client devices can connect to the device via USB or Wi-Fi interface; the device supports
data services, enabling you to communicate anytime and anywhere.
1.1 Device Appearance
The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
1. External Antenna Connector  It is used to connect an external antenna to enhance the
signal strength.
2.WPS  This button is used to start/end Wi-Fi Protected Setup
authentication process and enable/disable the Wi-Fi function.
 Hold it for 3 seconds to activate the WPS function.
 When the WPS function is available, press it to deactivate the
WPS function.
 Press it to enable/disable Wi-Fi function.
3. OLED Screen  It indicates the network type, signal strength, battery, Wi-Fi, etc.
4.Power  Hold the Power button to switch on/off the device.
5.Memory card slot (microSD
card)
 It is where you insert the memory card (microSD card).
6.Charger/USB port  Charge your device.
 Connect the client to your device via USB cable.