Zte MF91 - Page 28

28 Confidential and Proprietary Information of ZTE CORPORATION
The following items are displayed in this section on this page:
• WPA Algorithms: Selects the data encryption type to use.
¾
TKIP: Uses Temporal Key Integrity Protocol (TKIP) keys for encryption.
¾ AES: Uses Advanced Encryption Standard (AES) keys for encryption.
¾ Auto: Use the TKIP or AES keys for encryption automatically.
• Phrase: Enter the password manually.
WPS
Select Settings > Wi-Fi Settings > WPS, the WPS configuration is shown in the following figure:
• WPS Enable: Choose the desired mode.
• WPS PIN：If this option is enabled, you need to enter a wireless client’s PIN code in the field and keep
the same code in the client.
Enter the client PIN.
• WPS PBC：Push-Button Configuration
1. Select the PBC mode in the client WPS UI;
2. Select PBC mode in the WPS page of the device and submit;
3. Once the WPS active… is displayed on the screen, please press the "next" button on the Client
WPS UI. After a few seconds the client can access the WLAN, and the result will be shown in the
Client WPS UI.
Click Apply to confirm your configuration.