Zte MF920US - Connecting to Your Device

6
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client devices
have enabled Wi-Fi, and search for available wireless
networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual for further
details on how to search for wireless networks. If you use
a computer, you need to set your computer to obtain an IP
address automatically.
3. Select the Wi-Fi name (SSID) of your device, and click
Connect
.
4. Enter the Wi-Fi password if necessary, and click
OK
.
NOTE:
Refer to the chapter
Getting to Know the Wi-Fi SSID and
Password
to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device
successfully.