112
Gesture switch: After this feature is enabled, you can
swipe up or down using THREE fingers on the screen to
turn on or off the projector when Spro 2‟s screen is
turned on.
Remote Control: Enable this feature before using the
remote control app in your Android phone to control
Spro 2. See Remote Control.
Remote Control resolution: When you use the remote
control app in your Android phone to control Spro 2, you
can set this option to Low when Wi-Fi signal is unstable.
Eye protection: This feature allows Spro 2 to lower
projection brightness automatically when Spro 2 detects
its own quick movement.
Auto Projector: You can enable Spro 2 to turn on or off
the projector automatically at the time you set.
Restore: Restore default projector settings.
To Next Page
Loading...
