Zte Spro 2 - Projecting a Source on Your Phone Via Miracast (Wi-Fi Display)

47
NOTES:
 To disconnect the USB device from your Spro 2, you should
open the notification panel and touch > OK.
 Press the Power key twice quickly to adjust projection focus
automatically.
Projecting a Source on Your Phone via
Miracast (Wi-Fi Display)
You can display the content from compatible smartphone on your
Spro 2 with a Miracast (Wi-Fi Display) link.
1. Turn on the projector. See Turning On/Off the Projector.
2. Swipe down the status bar at the top of the screen and touch
Miracast to highlight it.