Zte Spro 2 - Using Wi-Fi Direct

59
 Avoid AP without Internet: Only use Wi-Fi networks that
have Internet connection.
 Wi-Fi band: Select the Wi-Fi frequency band according to
the available Wi-Fi networks.
 Install certificates: Install certificates from the internal
storage or the external microSDHC card. Some Wi-Fi
networks need to find the correct certificates to grant your
access.
 Wi-Fi optimization: Minimize battery usage when Wi-Fi
is on.
 MAC address: Check the MAC address.
 IP address: Check the IP address.
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to connect to each other
without the need for wireless access points (hotspots).
NOTE:
Wi-Fi Direct is not completely compatible among different device
manufacturers. You may need to install third-party applications to
share files between different devices from different
manufacturers.
Connect to Another Device via Wi-Fi Direct
1. Touch the Home key > SETTINGS tab > System >
Network > Wi-Fi.