57
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your Spro 2 to the access points which support WPS.
You can use one of the following methods to connect your Spro 2
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch the Home key > SETTINGS tab > System >
Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch .
4. Press the WPS button on the wireless router and the access
point will recognize your Spro 2 and add it to the network.
Method two: PIN of Spro 2
1. Touch the Home key > SETTINGS tab > System >
Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Menu key > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the
access point's setup page.
After entering the PIN, your Spro 2 automatically finds the access
point and configures the connection.
Method three: PIN of the access point
1. Touch the Home key > SETTINGS tab > System >
Network > Wi-Fi.
To Next Page
Loading...
