Zte Spro 2 - Page 71

71
NOTE:
When the mobile Wi-Fi hotspot feature is enabled, you cannot
access the Internet via Wi-Fi connection with Spro 2. You can still
remain connected to the Internet via mobile data network.
1. Touch the Home key > SETTINGS tab > System >
Network > Mobile Hotspot.
2. Slide the switch to turn on Mobile Hotspot.
3. On another device, locate your Spro 2 via Wi-Fi and connect
with it.
Or, if the device supports Wi-Fi Protected Setup, touch the
WPS icon on the device, and then touch on your Spro 2.
NOTE:
To stop sharing your data connection, turn off Mobile Hotspot.
Set Your Wi-Fi Hotspot
You can change the name of your Spro 2's mobile hotspot (SSID),
secure it with a password, and set other options.
1. Touch the Home key > SETTINGS tab > System >
Network > Mobile Hotspot.
2. Touch CONFIGURE and set the following options as follows.
 Network Name: Enter or edit a network name that other
devices see when scanning for Wi-Fi networks.
 Password: When you select WPA2 PSK for security,
touch the Password field to edit the security password.
 Show password: Check this option to display the
password in the Password field.