41
Touch to enter the left letter on the key. Double-tap or flick right to
enter the right letter/symbol on the key. You can also touch and
hold a key and slide left or right to choose more letters and
symbols.
If word prediction is enabled ( ), just touch the keys and
choose the right word.
To enable and use Curve:
1. In the TouchPal X keyboard screen, touch > and
check Curve
®
- Word gesture.
2. If prompted, touch OK to switch to the T26 layout.
3. Move your finger from letter to letter on the keyboard to
trace a word without lifting the finger until you reach the end
of the word.
NOTE:
Curve is only available in the T26 layout.
NOTES:
• Touch when you want to. If you want to enter a single letter, go
ahead and touch.
End of
the word
Start of
the word
To Next Page
Loading...
