48
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to connect to each other
without the need for wireless access points (hotspots).
Connect to Another Device via Wi-Fi Direct
1. Touch the Home Key > > Settings > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the ON position.
3. Touch the Menu Key > Wi-Fi direct. Your Spro will search
for other devices enabled with Wi-Fi direct connections.
4. Touch a device name under PEER DEVICES to connect with
it.
The other device will receive a connection prompt and need
to accept the request for connection. Both devices may need
to enter a common PIN.
5. Once connected the device is displayed as “Connected” in
the PEER DEVICES list.
Send Data via Wi-Fi Direct
1. Open the appropriate application and select the file or item
you want to share.
2. Select the option for sharing via Wi-Fi Direct. The method
may vary by application and data type.
3. Touch a device your Spro has connected with or wait for it to
search for new devices and touch one of them.
To Next Page
Loading...
