61
1. Connect your Spro with the USB device via the USB jack.
See Connecting to Networks and Devices – Connecting to a
USB Device.
2. Touch the Projection Key to turn on the projector. You may
need to wake up your Spro and unlock the screen first. See
Waking Up Your Spro.
3. Touch the Home Key > > File Manager > USB
DEVICE to open the file you want to project.
NOTE:
Before connecting your Spro with the USB device, slide the
status bar down to open the notification panel and ensure that
"Connect to PC" is not highlighted.
Projecting a Source on Your Phone
(Wi-Fi Display)
You can display the content from compatible smart phone on
your Spro with a wireless link.
To Next Page
Loading...
