Zte SPRO - Page 47

47
3. Touch the Menu Key > WPS pin entry.
4. The WPS PIN number displays on the screen. Enter the
PIN number into the access point's setup page.
After entering the PIN number, your Spro automatically finds the
access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.
Adjust Advanced Wi-Fi Settings
1. Touch the Home Key > > Settings > Wi-Fi.
2. Touch the Menu Key > Advanced to adjust the following
settings.
f Network notification: Get notifications in the status bar
when Wi-Fi is on and an open network is available.
f Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi
on in sleep mode.
f Avoid no internet connections: Only use Wi-Fi
networks that have Internet connection.
f Wi-Fi frequency band: Select the Wi-Fi frequency band
according to the available Wi-Fi networks.
f Wi-Fi optimization: Minimize battery usage when Wi-Fi
is on.
f MAC address: Check the MAC address.
f IP address: Check the IP address.