To Next Page

To Previous Page

For Apple devices with the Lighting connector, connect the device

to the HDMI cable with the Lightning Digital AV Adapter, and then

connect the HDMI cable to Spro2.

2. Turn on the projector.

3. Swipe down the status bar at the top of the screen and touch

HDMI to highlight it.

4. Operate your laptop/PC, TV STB, or Apple device to select the

content you want to watch.

NOTES:

 If your laptop/PC has other kinds of output ports, such as VGA

port, DVI port, DisplayPort and Mini DisplayPort, get a proper

adapter to connect the laptop/PC with your Spro2.

 The maximum resolution of the HDMI source supported by Spro2

is 1080p (1920 × 1080 pixels). When projecting an HDMI source,

the maximum resolution of the projection screen is 720p (1280 x

720 pixels).

 Press the Power Key twice quickly to adjust projection focus

automatically.

Other manuals for Zte Spro2

Questions and Answers:

Need help?

Do you have a question about the Zte Spro2 and is the answer not in the manual?

General