39
If the HDMI source cannot be projected properly when you use a VGA
to HDMI adaptor to connect your laptop/PC with Spro2, please follow
the instructions below.
Use an adaptor which supports 720p output.
Set the screen resolution of your laptop/PC to 1280 × 720 pixels
(for a Windows XP or Windows 7 laptop/PC), or right-click on the
desktop and select Graphics Options > Panel Fit > Maintain
Display Scaling (for a Windows 7 laptop/PC).
Set the screen refresh rate of your laptop/PC to 60 Hz or below.
For a Windows XP laptop/PC, right-click on the desktop and
select Properties > Settings > Advanced > Monitor > Screen
refresh rate; for a Windows 7 laptop/PC, right-click on the
desktop and select Screen resolution > Advanced settings >
Monitor > Screen refresh rate.
To Next Page
Loading...
