38
Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its name (SSID), or to add a Wi-Fi
network when you are out of range.
To connect to a secured network, you first need to get the security details from the network's
administrator.
1. Touch the Home key > > > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Add network.
4. Enter the network SSID (name). If necessary, enter security or other network configuration
details.
5. Touch SAVE.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the access
points which support WPS.
You can use one of the following methods to connect your phone to a wireless network using
WPS.
Method one: WPS button (Recommended)
1. Touch the Home key > > > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Push Button.
4. Press the WPS button on the wireless router and the access point will recognize your phone
and add it to the network.
Method two: PIN number
1. Touch the Home key > > > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Pin Entry.
To Next Page
Loading...
