39
4. The WPS PIN number displays on the screen. Enter the PIN number into the access point's
setup page.
After entering the PIN number, your phone automatically finds the access point and configures
the connection.
NOTE:
For detailed information about the WPS feature of the access point, please refer to its user
documents.
Forget a Wi-Fi Network
You can make your phone forget about the details of a Wi-Fi network that you added - for
example, if you don‟t want the phone to connect to it automatically or if it is a network that you no
longer use.
1. Touch the Home key > > > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch the Wi-Fi network name and then touch FORGET.
Adjust Advanced Wi-Fi Settings
1. Touch the Home key > > > Wi-Fi.
2. Touch > Advanced to adjust the following settings.
Network notification: Get notifications in the status bar when Wi-Fi is on and an open
network is available.
Scanning always available: Let Google‟s location service and other apps sacn for
networks, even when Wi-Fi is off.
Passpoint: Automatically connect to Passpoint-certified Wi-Fi access points.
Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in sleep mode.
Install certificates: Install certificates needed for connecting to certain Wi-Fi networks.
Wi-Fi Direct: Use the Wi-Fi Direct feature. See Using Wi-Fi Direct
®
.
WPS Push Button: Connect to a WPS network via the push button method.
WPS Pin Entry: Connect to a WPS network via the phone PIN method.
To Next Page
Loading...
