Getting Started
6
Getting Started
7
Charging the Battery
Your phone’s battery should have enough power for the phone to turn on, nd a signal,
and make a few calls. You should fully charge the battery as soon as possible.
If the battery is low, a pop-up message will appear on the screen. As you charge your
phone, the screen will tell you the exact battery level each time you wake it.
WARNING! Use only ZTE-approved chargers and cables. The
use of unapproved accessories could damage your phone or
cause the battery to explode.
1.
Connect the adapter to the charging port. Ensure that the
adapter is oriented correctly. Do not use force.
2. Connect the charger to a standard AC wall outlet. If the phone is
on, you’ll see a charging icon, such as or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
NOTE: If the battery is extremely low, you may be unable to power on the phone even
when it is being charged. In this case, try again after charging the phone for at least
30 minutes. Contact customer service if you still cannot power on the phone after
prolonged charging.
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and GPS
functionality can drain your battery. You can follow the helpful tips below to conserve
your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth o when not in use.
• Disable the GPS function when not in use. Most applications using this function
will periodically query the GPS satellites for your current location; each query drains
your battery.
• Use the Battery Saver feature.
Powering Your Phone On/O
• Press and hold the Power/Lock Key to turn on your phone.
• To turn it o, press and hold the Power/Lock Key to open the options menu.
Tap Power o > OK.
NOTE: If the phone freezes or takes too long to respond, press and hold the Power/Lock
Key for about 10 seconds to restart the phone.
Setting Up Your Phone for the First Time
When you rst power on your phone after you purchase it or reset it to factory settings
(see Settings – Device – Backup & Reset), you may need to set it up before using it.
1. Tap the language eld to select the language you want, and tap
.
2. Follow the prompts to set up your Wi-Fi connection, name, screen lock, Google
services, and other options.
Locking/Unlocking the Screen and Keys
Your phone allows you to quickly lock the screen and keys (put the phone into Sleep mode)
when not in use and also to turn the screen back on and unlock it when you need it.
Locking the Screen and Keys
To quickly turn the screen o and lock the keys, press the Power/Lock Key.
NOTE: To save battery power, the phone automatically turns o the screen after a certain
period of time when you leave it idle. You will still be able to receive messages and calls
while the phone screen is o.
Unlocking the Screen and Keys
1. Press the Power/Lock Key to turn the screen on.
2. Press and hold a blank area of the screen to unlock the phone, press and hold
at the bottom right to open the Camera app, or press and hold at the bottom left
to use Google voice commands. You can also double-tap a notication to open the
related app.
To Next Page
Loading...
