Zte ZFive 2 LTE - Google, Device Location, and Storage; Battery and App Management

100
Google
Manage settings for Google apps and services that are installed on your device.
Device
Location
Activate location services to determine your location. To use location-related applications,
such as nding your location on Google Maps, you must have location services turned on
on your phone.
1. Press the Home Key > > Settings > Location.
2. Slide the Location switch to the On position to turn on location access.
3. When location access is enabled, tap Mode to select location mode you want
to use.
• High accuracy: Get accurate location using GPS, Bluetooth, Wi-Fi, and mobile
networks.
• Battery saving: Use only Wi-Fi, Bluetooth, and mobile networks to get your
approximate location. This will drain less power from your battery than using GPS.
• Device only: Use GPS to pinpoint your location.
4. If necessary, tap Accelerated location to use Qualcomm® IZat™ hardware-accelerated
location to determine your position, even indoors.
Storage
The Storage settings menu lets you check memory information for your microSDHC card
and phone storage.
If a microSDHC card is installed, you can choose the default location for new data,
such as les downloaded, photos captured, and voice recorded. Tap Save location
and select either Phone (to save les to phone storage) or SD card (to save les to
the microSDHC card).
101
In the Portable storage section, you can manage the installed microSDHC card. For more
information about using the card, see Connecting to Networks and Devices – Using the
microSDHC Card as Portable Storage.
Battery
View remaining battery power and check which items have been using the battery.
Tap an app or service to adjust its settings in order to save battery life. For example, tap
Screen > Reduce the screen brightness and/or screen timeout to change screen
brightness and sleep setting.
Tap > Battery saver to manage battery saving mode, which reduces your phone's
performance and limits vibration, location services, and most background data to
improve battery life. You can turn Battery Saver on or o, or set a battery level at which it
turns on automatically.
Tap > Battery optimization. Battery optimization helps prolong battery standby time
when you’re not using the phone. To turn battery optimization o for specic apps, tap
Not optimized > All apps. Tap the app name, and then tap Don’t optimize > DONE.
Apps
Press the Home Key > > Settings > Apps to see apps installed on your phone and
manage them.
Tap > Show system/Hide system to show/hide system apps in the list.
Tap > Reset app preferences to reset all preferences. (You will not lose app data, but
app preferences will be restored to default.)
Tap to congure apps.
In the app list, tap an app to see its information. The following options may be available:
• DISABLE/ENABLE: Disable or enable the app.
• UNINSTALL: Uninstall the app.
• FORCE STOP: Stop the app.
• Storage: Check the amount of storage required and clear its data or cache.
Settings Settings