Zte ZXHN H2640 - Upgrade Software

ZXHN H2640 Maintenance Management Guide(TIM)
7-4
SJ-20200714160642-002 | 2020-07-27(R1.0)
Figure 7-4 Device Management Page
2. On this page, you can perform the following operations:
 Click Reboot to reboot the ZXHN H2640 device.
 Click Factory Reset to restore the factory default settings.
7.4.2 Upgrade Software
This procedure introduces how to upgrade Software.
Before upgrading software, make sure that the upgrade file is ready.
1. On the main page of the ZXHN H2640, select Management&Diagnosis > System
Management > Software Upgrade to the Software Upgrade page, see Figure 7-5.
Steps
Prerequisite
Abstract