Zte ZXHN H2640 User Manual

SJ-20200714160642-002 | 2020-07-27(R1.0)
5-1
Chapter 5
Configure the Local
Network
Table of Contents
Check the Local Network Status ........................................................................................... 5-1
Configure the WLAN ................................................................................................................ 5-2
Configure the LAN .................................................................................................................... 5-8
Configure the Route ............................................................................................................... 5-16
Configure the FTP Server Feature ...................................................................................... 5-21
Configure the UPnP ............................................................................................................... 5-22
Configure the DMS ................................................................................................................. 5-23
Configure the DNS ................................................................................................................. 5-25
5.1 Check the Local Network Status
The section describes how to check the status of Local Network. The relevant
information of Local Network status includes LAN Status, WLAN Status, WLAN Client
Status, LAN Client Status and USB Storage Status.
1. On the main page of the ZXHN H2640, select Local Network > Status to the Local
Network Status page, see Figure 5-1.
Abstract
Steps

Zte ZXHN H2640 Specifications

General

Device Type	Gateway
Model	ZXHN H2640
Dimensions	210 mm x 140 mm x 33 mm
Power Supply	12V DC/1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Wireless Standard	IEEE 802.11b/g/n/ac
Wireless Frequency Bands	2.4 GHz and 5 GHz
Maximum Wireless Speed	1200Mbps
Wi-Fi Standards	IEEE 802.11b/g/n/ac
WAN Interface	1 x GE port for WAN
DSL Standards	Not applicable (GE WAN port)