Zte ZXHN H2640 User Manual

SJ-20200714160642-002 | 2020-07-27(R1.0)
6-1
Chapter 6
Configure the VoIP
Table of Contents
Check the Status of VoIP ............................................................................................................ 6-1
Configure the SIP Accounts ................................................................................................... 6-1
Configure the Advanced Parameters of VoIP ......................................................................... 6-3
Configure the SIP Protocol ..................................................................................................... 6-5
Configure the Media ................................................................................................................. 6-6
Configure the Fax ..................................................................................................................... 6-7
Configure the Digit Map .......................................................................................................... 6-8
Configure the POS ................................................................................................................... 6-9
6.1 Check the Status of VoIP
This procedure shows the relevant information of VoIP status.
1. On the main page of the ZXHN H2640, select VoIP > Status. The VoIP Status page
is displayed, see Figure 6-1.
Figure 6-1 VoIP Status Page
2. Click Refresh to refresh the information.
6.2 Configure the SIP Accounts
Steps
Abstract

Zte ZXHN H2640 Specifications

General

Device Type	Gateway
Model	ZXHN H2640
Dimensions	210 mm x 140 mm x 33 mm
Power Supply	12V DC/1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Wireless Standard	IEEE 802.11b/g/n/ac
Wireless Frequency Bands	2.4 GHz and 5 GHz
Maximum Wireless Speed	1200Mbps
Wi-Fi Standards	IEEE 802.11b/g/n/ac
WAN Interface	1 x GE port for WAN
DSL Standards	Not applicable (GE WAN port)