Chapter 4 WEB Configuration
4-7
becoming idle for a period of time. The idle connection indicates that no packet is
received/sent.
Mode Vale range: DIRECT/AUTO. Selection of DIRECT indicates that the PPPOE
connection is always on line. Selection of AUTO indicates that the functions of idle
timeout and auto-redial triggered by traffic are activated.
Trace Whether the information controlling the session negotiation should be
displayed at the console, value range: ON/OFF.
Default: Select whether a default route is generated.
The PPPOE Session List shows the designated PPPOE sessions that have been
created.
Click the <Stop> button to stop and delete a PPPOE session.
To Next Page
Loading...
