Zte ZXV10 P802L - Making Phone Calls; Handset, Headset and Speakerphone; Dual Lines with SIP Account; Completing Calls

Press the four navigation keys to move up/down/left/right
Press the round button in the center to enter Keypad
Configuration “MENU” mode when phone is idle. Or use it
as ENTER key when in Keypad Configuration
Adjust volume by pressing “– “or “+”
0 - 9, *, #
Standard phone keypad; press # key to send call; press *
key to for IVR functions
Making Phone Calls
Handset, Headset and Speakerphone
The ZXV10 P802L allows you to make phone calls via handset, headset or
speakerphone. During the active calls the user can switch between the
handset, headset and the speakerphone by pressing the corresponding keys
on the phone.
Dual Lines with SIP Account
ZXV10 P802L can support up to two lines “virtually” mapped to two SIP
accounts. In off-hook state, select an idle line and the dial tone will be heard.
To make a call, select the line you wish to use. The user can switch lines
before dialing any number by pressing the LINE button.
Completing Calls
There are FIVE ways to complete a call:
1.
DIAL: To make a phone call.
• Take Handset off hook
or press SPEAKER button
or press HEADSET button
or press an available LINE key to activate speakerphone
• The line will have a dial tone
• Enter the phone number
• Press “#” or HANDSET button to send