Configuration Guide
The ZXV10 P802L can be configured in two ways. Firstly, using the Key Pad
Configuration Menu on the phone; secondly, through embedded web-
configuration menu.
Configuration Via Keypad
To enter the MENU, press the round button. Navigate the menu by using the arrow
keys: up/down and left/right. Press the OK softkey to confirm a menu selection.
Press left arrow key can exit to the previous menu. The phone automatically exits
MENU mode with an incoming call, the phone is off-hook or the MENU mode if left
idle for 20 seconds.
Press the MENU button to enter the Key Pad Menu. The menu options available
are listed in table 11.
Table 11: Key Pad Configuration Menu
Item Description
Call
History
Displays histories of answered, dialed, missed, and transferred
and forwarded calls. Select “Clear All” to clear all the call
history entries.
Status
Displays the network status, account status, software version
and hardware version of the phone.
Press network status to enter the sub menu for IP setting
information (DHCP/Static IP/PPPoE), Subnet Mask, Gateway
and DNS server.
Phone
Book
Displays the phonebook and downloads phonebook XML
LDAP
Directory
Displays the LDAP directory and downloads directory
Instant
Messages
Goes to instant messages
Direct IP
Call
Dials IP address for direct IP call
To Next Page
Loading...