the “#” key is included as part of the dial string.
G723 Rate
Encoding rate for G723 codec. By default, 6.3kbps rate is
set.
G726-32
Packing Mode
Select “ITU” or “IETF” for G726-32 packing mode.
ilbc Frame Size
ilbc packet frame size. Default is 20ms. For Asterisk PBX,
30ms might be required.
ilbc Payload
Type
Payload type for Ilbc. Default value is 97. The valid range
is between 96 and 127.
Conference
URI
Configure the conference URI when using Broadsoft N-
way calling feature.
Special Feature
Default is Standard. Choose the selection to meet special
requirements from Soft Switch vendors.
Saving the Configuration Changes
After the user makes a change to the configuration, press the “Update” button
in the Configuration Menu. The web browser will then display a message
window to confirm saved changes.
We recommend rebooting or powering cycle the IP phone after saving
changes.
Rebooting the Phone Remotely
Press the “Reboot” button at the bottom of the configuration menu to reboot
the phone remotely. The web browser will then display a message window to
confirm that reboot is underway. Wait 30 seconds to log in again.
To Next Page
Loading...