and then repeat the pattern. Up to three cadences are
supported.
Disable Call
Waiting
Default is “No”. If set to “Yes”, the call waiting feature will be
disabled.
Disable Call
Waiting
Tone
Default is “No”. If set to “Yes”, the call waiting tone will be
disabled.
Disable
Direct IP
Calls
Default is “No”. If set to “Yes”, direct IP calls will be disabled.
Use Quick
IP Call
Mode
Dial an IP address under the same LAN/VPN segment by
entering the last octet in the IP address.
In the Advanced Settings page there is an option “Use Quick
IP-call mode”. Default setting is “No”. When set to “Yes”, and
#XXX is dialed, where X is 0-9 and XXX <=255, phone will
make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc
comes from the local IP address REGARDLESS of subnet
mask.
#XX or #X are also valid so leading 0 is not required (but OK).
See Quick IP Call Mode for details.
Disable
Conference
Default is “No”. If set to “Yes”, conference will be disabled.
To Next Page
Loading...