Feature Key
Synchronizatio
n
Default is “No”. This option is to synchronize DND/Call
Forward features with Broadsoft. When set to “Yes”, a
SUBSCRIBE will be sent out periodically to the server.
Then when DND/Call Forward features (Call Forward No
Answer, Unconditional Call Forward and Call Forward on
Busy) are configured or changed on the phone and the
Broadsoft server side, those features will be synchronized
on the phone side and the Broadsoft server side.
PUBLISH for
Presence
Enable Presence feature.
Proxy-Require
SIP Extension to notify SIP server that the unit is behind
the NAT/Firewall.
Voice Mail
UserID
When configured, user can access messages by pressing
“MSG” button. This ID is usually the VM portal access
number.
Send DTMF
This parameter specifies the mechanism to transmit DTMF
digit. There are 3 supported modes: in audio which means
DTMF is combined in audio signal (not very reliable with
low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.
DTMF Payload
Type
Sends DTMF using RFC2833. The default is 101.
Early Dial Default is “No”. Use only if proxy supports 484 responses.
Dial Plan Prefix Sets the prefix added to each dialed number.
Dial Plan Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #,
A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a) xx+ - at least 2 digit numbers
b) xx. - only 2 digit numbers
c) ^ - exclude
d) [3-5] - any digit of 3, 4, or 5
To Next Page
Loading...