P
S
TN Line
4
Connect the power adaptor to the Conn-x power inlet and plug it in.
Press the power button SWITCH in the back panel of the router
to turn your router on.
The Power, DSL, Internet, LAN and WLAN LEDs will light up.
If you wish to connect additional phones to other plugs, you must
use a filter for each phone device. Connect your phone to the filter
and the filter to the phone jack.
Note: If your phone network is connected to any other device (alarm,
switchboard, etc.), you must use additional ADSL filter or splitter.
Please address a specialized crew.
10
To Next Page
Loading...
