Activation/Deactivation of Wireless Network & Reset of
ADSL2+
R
out
er
Wireless operation is activated. To deactivate it, press and hold
pressed the Wi-Fi button on the back of the ADSL2+ Router until
the WLAN LED on the front side of the ADSL2+ Router is off.
To activate wireless operation, press and hold pressed the same
button for more than 1 second. The WLAN LED will turn on.
If you wish to return your ADSL2+ Router to the default settings,
first make sure that the ADSL2+ Router is on. Press and hold
pressed the RESET switch on the underside of your ADSL2+
Router, until all LEDs are off.
Wait until the LEDs of the ADSL2+ Router turn back ON.
Resetting to default settings will delete any information you have
entered and stored in the ADSL2+ Router.
2
4
To Next Page
Loading...
