Zte ZXV10 - Powering On the Device; Software Upgrade Process

ISDN Line
1
2
Disconnect the phone cable from the ISDN (N.T. 1) device and
connect it to the black port of the splitter.
A. Use the blue cable to connect the blue port of the splitter to
the phone jack.
B . Use the grey cable to connect the grey splitter port to the grey
port on the Conn-x router.
Note: If your phone network is connected to any other device (alarm,
switchboard, etc.), you must use additional ADSL filter or splitter.
Please address a specialized crew.
12