ZyXEL Communications Dimension GS-2024 - Port Security; 16.1 About Port Security; 16.2 Port Security Setup

GS-2024 User’s Guide
121
CHAPTER 16
Port Security
This chapter shows you how to set up port security.
16.1 About Port Security
Port security allows only packets with dynamically learned MAC addresses and/or configured
static MAC addresses to pass through a port on the Switch. The Switch can learn up to 16K
MAC addresses in total with no limit on individual ports other than the sum cannot exceed
16K.
For maximum port security, enable this feature, disable MAC address learning and configure
static MAC address(es) for a port. It is not recommended you disable port security together
with MAC address learning as this will result in many broadcasts. By default, MAC address
learning is still enabled even though the port security is not activated.
16.2 Port Security Setup
Click Advanced Application > Port Security in the navigation panel to display the screen as
shown.