GS-2024 User’s Guide
89
CHAPTER 9
Static MAC Forward Setup
Use these screens to configure static MAC address forwarding.
9.1 Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices
on your network.
9.2 Configuring Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table.
Static MAC addresses do not age out. When you set up static MAC address rules, you are
setting static MAC addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allows only computers in the MAC
address table on a port to access the Switch. See Chapter 16 on page 121 for more information
on port security.
Click Advanced Applications > Static MAC Forwarding in the navigation panel to display
the configuration screen as shown.
Figure 37 Advanced Application > Static MAC Forwarding
To Next Page
Loading...
Need help?
General
