Chapter 25 Access Control
GS-2024 User’s Guide
186
25.3.4  Configuring SNMP     
From the Access Control screen, display the SNMP screen. You can click Access Control to 
go back to the Access Control screen. 
Figure 103   Management > Access Control > SNMP 
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.15.28.2.1 This trap is sent when more than 
99% of the MAC table is used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.15.28.2.2 This trap is sent when less than 
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.16.0.1 This trap is sent when a variable 
goes over the RMON "rising" 
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16.0.2 This trap is sent when the variable 
falls below the RMON "falling" 
threshold.
Table 70   SNMP Switch Traps  (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION